Français
 
Anatacau-Pivert Formation
Stratigraphic label: [narc]np
Map symbol: nAnp
 

First published: 15 November 2017
Last modified: 19 January 2024

 

 

 

 

 

 

 

  DISCLAIMER: This English version is translated from the original French. In case of any discrepancy, the French version shall prevail.  

Informal subdivision(s)
Numbering does not necessarily reflect the stratigraphic position.
 
nAnp7 Siltslate, mudslate and conglomerate horizons
nAnp6 Felsic, intermediate and mafic tuffs
nAnp5 Iron formation
nAnp4 Rhyolite and rhyodacite
nAnp3 Andesite and trachyte
nAnp2 Garnet amphibolite
nAnp1 Amphibolitized basalt and amphibolite
 
Author(s): Moukhsil, 2000
Age: Neoarchean
Stratotype: None
Type area: Anatacau (NTS sheet 32C02) and Pivert (sheet 32C08) lakes area. The Kapeykuch Ministikw Lake area (sheet 32C08) displays all the units of the Anatacau-Pivert Formation.
Geological province: Superior Province
Geological subdivision: La Grande Subprovince
Lithology: Volcano-sedimentary rocks
Category: Lithodemic
Rank: Formation
Status: Formal
Use: Active

 

Related unit(s)
  • Eastmain Group

     

    • Prosper Formation
    • Auclair Formation
    • Low Formation
    • Clarkie Formation
    • Anaconda Formation
    • Wabamisk Formation
    • Komo Formation
    • Kasak Formation
    • Bernou Formation
    • Pontax Formation
    • Anatacau-Pivert Formation
    • Pilipas Formation
    • Natel Formation
    • Kauputauch Formation

 

 

Background

Franconi (1978) first used the term “Anatacau-Pivert Bench” to describe a basalt sequence in the Anatacau (NTS sheet 32C02) and Pivert (sheet 32C08) lakes region in the Lower Eastmain River Volcanic Band (LERVB). The work of Moukhsil (2000) helped to define and formalize this volcano-sedimentary sequence, which the author referred to as the Anatacau-Pivert Formation. This unit is interpreted as part of the LERVB third volcanic cycle, which is between 2723 and 2705 Ma (Moukhsil et al., 2001, 2002). Recently, Bandyayera and Daoudene (2018, 2019) extended southward (Rupert river area) units nAnp1, nAnp5, nAnp6 and nAnp7.

Description

The Anatacau-Pivert Formation consists of amphibolitized volcanic rocks (basalt, andesite, rhyolite, tuffs) overlain by sedimentary rocks (siltslate, mudslate and conglomerate). It was subdivided by Moukhsil (2000) into seven units: 1) amphibolitized basalt and amphibolite (nAnp1), 2) garnet amphibolite (nAnp2), 3) andesite and trachyte (nAnp3), 4) rhyolite and rhyodacite (nAnp4), 5) iron formations (nAnp5), 6) felsic, intermediate and mafic tuffs (nAnp6), and 7) siltslate, mudstone and conglomerate horizons (nAnp7). Units nAnp1, nAnp5 and nAnp6 were extended southward in the Rupert River area by Bandyayera and Daoudene (in preparation). 

 

Anatacau-Pivert Formation 1 (nAnp1): Amphibolitized Basalt and Amphibolite

Unit nAnp1 consists of fine-grained metabasalt grey-green in altered surface and greyish green in fresh exposure. These rocks are composed of massive to pillow flows, locally brecciated and usually amygdaloidal. Pillow basalt represents more than 60% of unit nAnp1. Decimetric to metric pillows are deformed and flattened, showing amphibolitized hyaloclastic margins. In places, basalt flows alternate from massive to pillowed. Metric horizons of brecciated lava are associated with these two facies. Amygdules are widespread and make up 20% of the rock in places. They are filled with quartz or plagioclase and have a stretch or flattened appearance. Under the microscope, basalt shows a nematoblastic to granoblastic texture. Green hornblende is the dominant mineral and constitutes 60 to 80% of the rock. Partially to completely sericitized plagioclase (30-40%) is recrystallized (granoblastic). Biotite (2%) is partially chloritized. Accessory minerals are apatite, zircon, titanite, epidote, carbonates and opaque minerals.

Low-thickness mafic or ultramafic sills have also been incorporated into this unit. Horizons of strongly altered garnet-rich amphibolite (up to 30%) are observed throughout the basaltic unit. Small horizons of paragneiss 15 to 40 cm thick are also interbedded in the basaltic sequence. These metasediments are generally medium-grained and contain up to 10% garnet as crystals of 2 to 5 mm. In places, the proportion of garnet is 50%, which suggests hydrothermal alteration. Some metasediment lenses also contain cordierite porphyroblasts (5%). The metabasalt sequence also includes metric to decametric (locally centimetric) horizons of ash tuffs and lapilli tuffs. These rocks contain up to 80% plagioclase and 5 to 20% quartz pheoncrystals and show muscovite alteration (sericite).

 

Anatacau-Pivert Formation 2 (nAnp2): Garnet Amphibolite

Unit nAnp2 is interstratified with the nAnp1 unit. It outcrops in the Kaministikuch Lake area (sheet 33C01) where it was described by Franconi (1978). The unit consists of amphibolite with 10% garnet porphyroblast 1 to 3 cm in diameter. Remains of pillows are still recognizable. Under the microscope, the rock contains 70-80% hornblende, 10% garnet, 10% plagioclase and 2% quartz. Accessory minerals are biotite and tourmaline. 

 

Anatacau-Pivert Formation 3 (nAnp3): Andesite

Unit nAnp3 consists of sparse horizons of andesitic lava, locally amygdaloidal. In the field, it is difficult to differentiate between basaltic lava (unit nAnp1) and andesitic lava (unit nAnp2) due to metamorphism and strong alteration of the rock. The composition of these volcanics was confirmed by lithogeochemical analyses. Andesite contains up to 15% magnetite and is associated with horizons of iron formation at the oxide facies (unit nAnp5). Under the microscope, andesite shows a trachytic texture associated with the preferential orientation of plagioclase microlites.

 

Anatacau-Pivert Formation 4 (nAnp4): Rhyolite and Rhyodacite

Unit nAnp4 consists of massive rhyolite and rhyodacite that outcrop on sheets 33C01 and 33C02. These rocks are silicified, chloritized and sericitized.

 

Anatacau-Pivert Formation 5 (nAnp5): Iron Formation

Unit nAnp5 consists mainly of iron formations at the oxide facies and, locally, at the silicate facies. Sulphidic chert horizons have also been integrated into this unit. Aeromagnetic maps highlight this unit with high magnetic susceptibility. Unit nAnp5 is interbedded in mafic volcanics of units Anp1 and Anp2. The thickness of these units varies from a few metres to about 30 metres. They display banding materialized by alternating magnetite beds, recrystallized brecciated chert ribbons or centimetric bands of metasediment.

 

Anatacau-Pivert Formation 6 (nAnp6): Felsic, Intermediate and Mafic Tuffs

Unit nAnp6 forms discontinuous horizons within the nAnp1 unit or in contact between the nAnp1 unit and the sedimentary sequence of the nAnp7 unit. It is composed of lapilli or block volcanoclastics (tuffs) of felsic to intermediate composition, locally mafic. Some horizons consist of only andesitic tuffs. Felsic tuffs contain about 60% felsic fragments and show strong alteration in chlorite and sericite. Some felsic horizons have quartz and plagioclase phenocrystals 0.3 to 0.7 mm in diameter. Lithic fragments are recrystallized and generally stretched and flattened parallel to schistosity. Intermediate tuffs contain horizons of trachytic texture andesite that are characterized by the presence of plagioclase phenocrystals. These rocks are granoblastic to lepidoblastic, locally banded.

 

Anatacau-Pivert Formation 7 (nAnp7):  Siltslate, Mudslate and Conglomerate Horizons

Unit nAnp7 was added to the Anatacau-Pivert Formation, and not to the Auclair Formation of the Nemiscau Subprovince, due to its close association with volcanic rocks, exceptional preservation of primary structures and low metamorphic facies (Moukhsil, 2000). It consists of siltslate, mudstone and conglomerate horizons. Siltslate and mudslate show an interlocked hemigranoblastic texture. Some of the outcrops in this unit show well-preserved S0 stratification, characterized by alternating more or less fine beds with biotite, greenish chlorite, quartz and muscovite.

Microscopic analysis shows that the rock is composed of quartz (up to 55%), plagioclase (11%), biotite (23%) and muscovite (15%). Accessory minerals are hornblende, chlorite, apatite, zircon, sericite, tourmaline, carbonates and opaque minerals. In places, carbonates form areas 0.20 to 0.50 mm in diameter.

Thickness and distribution

The Anatacau-Pivert Formation is the largest volcano-sedimentary sequence in the central part of the LERVB. Its lateral extension exceeds 45 km in the NE-SW direction, while its width varies from a few hundred metres in the periphery to 8 km in the central part. 

Datation

Isotopic dating of a rhyolite sample (nAnp4) gave an age of 2723 Ma (Moukhsil et al., 2001). A plagioclase porphyritic diorite dyke that cuts the basalts (nAnp1) at the Réservoir Grid C-52 mineralized zone has been dated to 2713 Ma (Moukhsil et al., 2001), providing a minimum age for unit nAnp1. Finally, the dating of a felsic tuff level inside a sequence of amphibolitized basalts (nAnp1) yielded an age of 2716 Ma. These ages allow placing the Anatacau-Pivert Formation in the third volcanic cycle of the LERVB (2720-2705 Ma; Moukhsil et al., 2003).

Unit Sample Isotopic System Mineral Cristallization Age (Ma) (+) (-) Inheritance Age (Ma) (+) (-) Reference(s)
nAnp4

1999-AM-1202

U-Pb Zircon 2723,1 2,2 2,2       Moukhsil et al., 2001
nAnp1 EAST1230B U-Pb Zircon 2712,8 2,1 1,6      
nAnp1

2016-RP-6075C

U-Pb Zircon 2716 7 7       David, 2018
      2750 10 10

 

Stratigraphic Relationship(s)

The Anatacau-Pivert Formation is one of the five volcano-sedimentary units of the LERVB (Kauputauch, Natel, Anatacau-Pivert, Kasak and Komo formations) that Mukhsil et al. (2002) have combined into the Eastmain Group. It is located in the central part of the Eastmain Group, between the Natel Formation at the east and Komo Formation at the west.  

Paleontology

Does not apply.

References

Publications accessibles dans SIGÉOM Examine

BANDYAYERA, D., DAOUDENE, Y., 2018. Géologie de la région du lac Champion, sous-provinces de La Grande et de Nemiscau, à l’est de Waskaganish, Eeyou Istchee Baie-James, Québec, Canada. MERN; BG 2018-06, 2 plans.

BANDYAYERA, D., DAOUDENE, Y., 2019. Géologie de la région du lac Nemiscau, secteur ouest de la rivière Rupert (SNRC 32N06, 32N07 et 32N11). MERN; RG 2018-03, 58 pages, 1 plan.

DAVID, J., 2018. Datations U-Pb dans les provinces de Grenville et du Supérieur effectuées au GEOTOP en 2016-2017. MERN, GEOTOP; MB 2018-17, 22 pages.

FRANCONI, A., 1978. Rapport géologique final, la bande volcanosédimentaire de la rivière Eastmain inférieure, saisons de terrain 1975 et 1976. MRN; DPV 574, 186 pages, 2 plans.

MOUKHSIL, A., 2000. Géologie de la région des lacs Pivert, Anatacau, Kauputauchechun et Wapamisk, 33C/01, 33C/02, 33C/07 et 33C/08. MRN; RG 2000-04, 49 pages, 4 plans.

MOUKHSIL, A., LEGAULT, M., BOILY, M., DOYON, J., SAWYER, E., DAVIS, D. W., 2003. Synthèse géologique et métallogénie de la ceinture de roches vertes de la Moyenne et de la Basse-Eastmain (Baie-James). MRN; ET 2002-06, 57 pages, 1 plan.

MOUKHSIL, A., VOICU, G., DION, C., DAVID, J., DAVIS, D.W., PARENT, M., 2001. Géologie de la région de la Basse-Eastman centrale, 33C03, 33C04, 33C05 et 33C06. MRN; RG 2001-08, 54 pages, 4 plans.

 

Suggested citation

 

Ministère de l’Énergie et des Ressources naturelles (MERN). Anatacau-Pivert Formation. Quebec Stratigraphic Lexicon. https://gq.mines.gouv.qc.ca/lexique-stratigraphique/province-du-superieur/formation-anatacau-pivert_en [accessed on Day Month Year].

Collaborateurs

Première publication

Daniel Bandyayera, P. Geo., Ph.D. daniel.bandyayera@mern.gouv.qc.ca (redaction)

Mehdi A. Guemache, P. Geo., Ph.D. (coordination); Jean Goutier, P. Geo., M.Sc. (critical review); Claude Dion, Eng., M.Sc. (editing); Céline Dupuis, P. Geo., Ph.D. (English version); Caroline Thorn (HTML editing). 

 
18 octobre 2018